Move to the text

Wire for laser welding

Wire (padding materials) for laser welding

We offer various types and sizes of welding wire (padding materials).
It is the welding wire of the high quality developed for laser welding use. (available for TIG welding)

For other materials, please contact us.

Straight wire equivalent to 1m

Materials name / size φ
0.3 φ
0.4 φ
0.6 φ
Satellite #6
●=Stocks △ = special order product (please confirm stock at the time of an order)
 

All the above items are equivalent products.

1 cylinder case = approximately 330mm in length wire x 3 pcs included (approximately 1m equivalency).
Please note that the products are subject to change or revision without notice.
◯ An order example: (materials name) Satellite #6, (size) 0.3 φ, (quantity) 1 cylinder case
※Selling separately such as "only 1 pc 330mm wire" is not available. The minimum lot is "1 cylinder case".

Equivalent to 10m winding

Equivalency product
0.1 φ
0.15 φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
STAVAX
MAS1
NAK80
SKD61
SKD11
We recommend straight wire No.01_9600 made in Germany.
PX5
S50C
FC250
SCM440
Nickel
SUS304
SUS310
SUS316
SUS430
SUS630
Aluminum (Aℓ4043)
Aluminum (Aℓ5356)
Beryllium copper
 
Copper
●=Stocks ●=New addition product
Brand name
0.1 φ
0.15 φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
DHW
DHW =Made by Daido Steel Co.,Ltd.
Welding repair materials exclusive for die casting mold.

●=Stocks
Brand name
0.1 φ
0.15 φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
Ti (titanium)
●=Stocks
 

All the above items are equivalent products.

Please note that the products are subject to change or revision without notice.
◯ An order example: (materials name) STAVAX, (size) 0.1 φ, 10m roll (quantity) 1 pc

100 g winding

Materials name / size φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
STAVAX
MAS1
NAK80
SKD61
SKD11
We recommend straight wire No.01_9600 made in Germany
PX5
S50C
SCM440
SUS304
SUS310
SUS430
SUS630
Aluminum (Aℓ4043)
Aluminum (Aℓ5356)
Beryllium copper
Length per 100 g
≒350m
≒256m
≒170m
≒100m
≒70m
≒40m
●=Stocks ●=New addition product △ = special order product (please confirm stock at the time of an order)
Brand name
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
DHW
Length per 100 g
≒350m
≒256m
≒170m
≒100m
≒70m
≒40m
DHW =Made by Daido Steel Co.,Ltd.
Welding repair materials exclusive for die casting mold.


●=Stocks

25m winding

Brand name
0.3 φ
0.4 φ
0.5 φ
SS400

Straight wire made in Germany

■ Contains 100 g (320mm in length straight wire) / Germany ■

Article number
0.1 φ
0.15 φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
01_9160
-
-
-
02_STV
-
-
-
01_9200
-
-
-
01_9350
-
-
-
I625
-
-
-
04_1720
-
-
-
01_9600
-
-
-
≒450m
≒350m
≒256m
≒170m
≒100m
≒70m
≒40m

■ Contains 320mm x 16 pcs (5.12m) / Germany ■

Article number
0.1 φ
0.15 φ
0.2 φ
0.25 φ
0.3 φ
0.4 φ
0.5 φ
0.6 φ
01_9160
-
-
02_STV
-
-
01_9200
-
-
01_9350
-
-
I625
-
-
04_1720
-
-
-
01_9600
-
-
※ Only 0.1 φ is 5m winding.

●=Stocks ●=New addition product
Article number
Compliant material, characteristic
01_9160
For SKD61 etc. Quenching is possible.
C 0.25% - Si 0.6% - Mn 0.7% - Cr 5.0% - Mo 4.0% - Ti 0.6% - Fe Rest
02_STV
For STAVAX. A wire that is exceedingly close to the STAVAX original.
Equivalent to AISI standard 420.
01_9200
For STAVAX, HPM38 etc. Quenching is possible.
C 0.35% - Si 0.3% - Mn 1.2% - Cr 7.0% - Mo 2.0% - Ti 0.3% - Fe Rest
01_9350
The welding metal of martensite (martensite) is suitable for plating of steel to heat-process and the harder annealing steel.
Good wear resistance in the heating state up to 450 degrees Celsius.
Quenching possibility (HRC42-47).
C 0.20% - Si 0.6% - Mn 0.4% - Cr 17.5% - Mo 1.1% - Ni 0.3% - Fe Rest
I625
Used for laser welding of Inconel625, Inconel825, Inconel 25-6Mo and much austenite-based stainless steel. In addition, it is suitable for surface treatment of steel , as well as laser welding of 9% Ni steel and various rust-resistant molds. Oxidation resistance and heat resistance.
22.5% of C 0.01% - Si 0.08% - Mn 0.01% - Cr
-0.03% of Mo 8.7% - Ti 0.17% - Al 0.13 - Cu
-64.5% of Fe 0.35% - Nb 3.5% - Ni
04_1720
Beryllium copper. Addition and bonding to bronze, copper, and steel.
01_9600
For SKD11 etc.
Laser welding use of die which is easy to be worn and high-speed processing steel (HSS).
HRC57-62.
Recommendation: Pre-heating in 50 degrees Celsius or less than relaxation temperature of the basic material.
4.0% of C 1.0% - Si 0.3% - Mn 0.3% - Cr
-W 1.8% - Mo 8.3% -V 1.9% - Fe Rest

All the above items are equivalent products.

Please note that the products are subject to change or revision without notice.
◯ An order example: (article number) 01_9160, (size) 0.2 φ, 100 g included, (quantity) 2pcs
◯ An order example: (article number) 02_STV, (size) 0.3 φ, 16 pcs included, (quantity) 2pcs
Back to TOP